Body'
Body' Guangzhou Instrument Calibration
Body' Spring testing machine must undergo strict testing before it can be put into use. It is specially used to test the elastic strength of spring. If the performance does not reach It is easy to cause accidents if the requirements are not met. This shows how important the measurement calibration of the spring testing machine is.
Body' Body' Turn on the power and check the digital tube display. Preheat the machine for about minutes. The button testing machine enters the normal testing state. At this time, the test force and displacement are automatically cleared. The upper display shows the displacement and the lower display shows the test force.
Body' Body' According to the free length of the calibration spring of the instrument, raise the lifting base until the spring under test can be placed between the two pressure plates or between the upper and lower hooks, fix it on the upright column with the handle, and press Press the / key to remove the dead weight of the spring. Pull the operating handle to make the upper pressure plate and the spring just contact each other. Press the clear / key to make the displacement digital tubes all zero. Apply force to the spring under test. When the displacement digital tube displays the displacement When the deformation of the spring is reached, the force value displayed by the force value digital tube is the test force value of the spring under test.
Service hotline Ms. Chen
Consultation (Foshan Measurement Calibration Center)
News