The body' turbidity meter must be calibrated twice
Guangzhou Metrology Calibration
The body' turbidity meter must be calibrated if the time interval exceeds six months. It is used to measure insoluble particles suspended in water or transparent liquids. The degree of scattering or attenuation of light produced by a substance can quantitatively characterize the content of these suspended particles.
The body' body' needs to be preheated for several minutes before use. Then put the sample to be measured into the sample bottle, then put it into the turbidity meter and cover the light shield. The reading displayed at this time is the measured value. For the turbidity value of the sample, if the measured value of the turbidity meter exceeds the allowed range, the turbidity meter must be recalibrated.
Body'
Body' Turbidimeter Measurement Calibration
Body' Body' The calibration of the turbidity meter mainly involves the preparation of standard samples. Each time the sample bottle is put into the turbidity meter , align the mark on the sample bottle with the protruding mark on the turbidity meter
Body' Body' Put the zero turbidity water into the sample bottle, then put it into the turbidity meter and adjust the zero knob to display
Body' Body' Put the standard substance into the sample bottle, put it into the turbidity meter and adjust the indexing knob so that it displays
Body' Body' Put the standard substance into the sample bottle, put it into the turbidity meter and adjust it The linear knob is shown as . Repeat several times to put the standard into the turbidity meter, and then check whether the reading still displays the sum. If the reading changes, adjust the graduation and linear knobs until they are accurate.
Service hotline Ms. Chen
Consultation (Foshan Metrology Calibration Center)
Body'
News